Wellpoint Installation Kloof covers shallow groundwater enquiries for Kloof and the surrounding Upper Highway area.
Kloof sits on the escarpment, which means a wellpoint is very rarely the right tool.
Send your street. We will tell you straight whether Kloof ground will take a wellpoint or whether you are looking at a borehole.
Check Your Kloof PropertyGround Conditions
Kloof sits on Natal Group sandstone above the gorge, with shale and tillite beneath and clay above. Jetting needs loose, water-bearing sand, and there is very little of that here.
The other constraint is depth. Even where the soil profile is workable, the standing water level on the escarpment sits far below the seven to eight metres a surface suction pump can lift. A wellpoint that cannot reach the water is no use regardless of what the rig can get through.
Boreholes are the practical answer in Kloof. Local domestic boreholes typically run 30 to 90 metres with a submersible pump, which is a different installation and a different budget to a wellpoint.
Services Available in Kloof
Prices
| Item | Indicative range |
|---|---|
| Standard wellpoint installed with pump | R7,000 – R12,000 |
| No-water or dry-hole fee | R2,500 – R4,000 |
| Additional point, same visit | R2,500 – R5,000 |
| 1.1 – 1.5kW pump, supplied and fitted | R6,500 – R12,000 |
| Automatic controller with dry-run cut-out | R1,200 – R3,000 |
| Connection to existing irrigation | R1,500 – R4,500 |
| Sediment filtration | R1,800 – R4,500 |
| Irrigation-suitability water test | R450 – R1,200 |
| Annual service | R850 – R1,800 |
| Site assessment or call-out | R450 – R950 |
These are indicative Durban market ranges, not a quotation. Wellpoint pricing moves with depth, ground conditions, access and the pump specified, so treat these as a budgeting starting point and compare written quotes on what each one actually includes.
Ask what happens if no usable water is struck, whether the pump, controller and electrical connection are in the price, and what the guarantee covers.
Registration
Kloof falls within eThekwini, so the municipality expects the abstraction point to be registered once it is installed, and that obligation sits with the property owner rather than the contractor. National guidelines also require groundwater use to be metered with records kept, and the Water By-law prohibits interconnecting a groundwater system with the municipal water installation. Requirements change, so confirm the current position with eThekwini before installing.
Also Covered Nearby
Installers quoting Kloof generally also cover Hillcrest, Gillitts, Pinetown, Waterfall and Everton. Full service detail for the wider network is on Wellpoint Installation Durban.
Related Services
Frequently Asked Questions
Do wellpoints work in Kloof?
Very rarely. The escarpment geology will not jet, and the water table sits well below the suction limit of a surface pump.
What is the suction limit?
Roughly seven to eight metres of lift for a surface-mounted jet pump. Below that a submersible pump in a borehole is the only option.
How deep is a Kloof borehole?
Domestic boreholes in this part of Durban commonly run 30 to 90 metres, with the water table often between 15 and 60 metres down.
What yield can I expect from a borehole?
Sustainable yields around Durban typically fall between roughly 800 and 3,500 litres an hour. Above about 2,500 litres an hour you can irrigate a substantial garden.
Is it worth asking a wellpoint installer at all?
Yes, for an honest assessment. Many wellpoint contractors also drill or can refer you, and the assessment tells you what you are actually dealing with.
Do I need to register a borehole?
Yes. eThekwini expects registration once drilling is complete, and it is the owner's obligation rather than the driller's.
Get a Kloof Wellpoint Quote
Send your street and garden size, and Kloof installers quote you directly.
Free to use, no obligation. Requests go to LEADERR APPROVED wellpoint installers working in Kloof and the surrounding area.
Client Reviews
Powered by leaderr
